Genie 114002 manual Tilt-back Operation Instructions Observe and obey, Tilt-back Frame

Third Edition • First Printing Operator’s Manual

Tilt-back Operation Instructions

Tilt-back Operation Instructions

Observe and obey:

The retaining pin must be inserted to prevent the spring-loaded tilt-back frame from dropping.

Do not tilt the machine back unless the area is clear of personnel and obstructions.

Do not stand behind or under the tilt-back frame when raising or lowering it.

Tilt-back Frame

The Genie AWP Super Series has a tilt-back frame which allows the machine to roll through a standard doorway. The tilt-back frame is standard equipment on standard base AWP-36S and 40S models, and optional on standard base AWP-15S, 20S, 25S and 30S models. The tilt-back frame is not available on narrow base machines or rough terrain base machines.

Lifting Instructions

The number of people required to load and unload a machine is dependent on a number of factors, including but not limited to:

·the physical condition, strength and disabilities or prior injuries of the people involved

·the vertical and horizontal distances the machine has to be moved

·the number of times the machine will be loaded or unloaded

·the stance, posture and grip used by the people involved

·the lifting techniques used

·the site conditions and weather in which the activity is being performed (i.e., slippery, icy, raining)

The appropriate number of people and proper lifting techniques must be used to prevent physical injury.

Part No. 114002 Genie AWP Super Series 25