Third Edition • First Printing | Operator’s Manual |
|
|
|
|
Do not raise the platform unless the machine is level. Do not set the machine up on a surface where it cannot be leveled using only the leveling jacks.
Do not cause a horizontal force or side load to the machine by raising or lowering a fixed or overhanging load.
Do not push off or pull toward any object outside the platform.
Maximum allowable side force
ANSI / CSA 50 lbs / 222 N
Maximum allowable manual force
CE / AUS
45 lbs / 200 N
SAFETY RULES
of the machine.
When moving the machine with a forklift or other transport vehicle, the platform should be fully lowered, the machine should be turned off and no personnel shall remain in the platform.
Do not use the machine on a moving or mobile surface or vehicle.
Do not raise the platform when wind speeds may exceed 28 mph / 12.5 m/s. If wind speeds exceed 28 mph / 12.5 m/s when platform is raised, lower the platform and do not continue to operate the machine.
Do not operate the machine in strong or gusty winds. Do not increase the surface area of the platform or the load. Increasing the area exposed to the wind will decrease machine stability.
Do not operate the machine near
Do not alter or disable machine components that in any way affect safety and stability.
Do not replace items critical to stability with items of different weight or specification. Use only Genie authorized replacement parts.
Do not push the Genie AWP from the platform side
Occupants, equipment and materials shall not exceed the maximum platform capacity.
Maximum capacity |
|
|
350 lbs | 159 kg | |
350 lbs | 159 kg | |
350 lbs | 159 kg | |
350 lbs | 159 kg | |
300 lbs | 136 kg | |
|
|
|
Maximum occupancy |
| 1 person |
|
|
|
Part No. 114002 | Genie AWP Super Series | 3 |
