
Operator’s Manual | Third Edition • First Printing |
|
|
|
|
Workplace Inspection
Do Not Operate Unless:
You learn and practice the principles of safe machine operation contained in this operator’s manual.
1 Avoid hazardous situations.
2 Always perform a
3 Always perform function tests prior to use.
4 Inspect the workplace.
Know and understand the work place inspection before going on to the next section.
5 Only use the machine as it was intended.
Workplace Inspection
Be aware of and avoid the following hazardous situations:
·
·bumps, floor obstructions or debris
·slopes that exceed the machine’s leveling capability
·unstable or slippery surfaces
·overhead obstructions and high voltage conductors
·hazardous locations
·inadequate surface support to withstand all load forces imposed by the machine
·wind and weather conditions
·the presence of unauthorized personnel
·other possible unsafe conditions
Fundamentals
The workplace inspection helps the operator determine if the workplace is suitable for safe machine operation. It should be performed by the operator prior to moving the machine to the workplace.
It is the operator’s responsibility to read and remember the workplace hazards, then watch for and avoid them while moving, setting up and operating the machine.
18 | Genie AWP Super Series | Part No. 114002 |