Third Edition • First Printing

Operator’s Manual

 

 

 

 

Returning the Machine to Standing Position

1Be sure the area below the machine base and T-handle is clear of personnel and obstructions.

2Slide out the T-handle untl the lock pin snaps into place.

3Carefully pull down the T-handle until the machine rests at mid- tilt position.

4Lower the machine with

the T-handle until the base casters are in contact with the ground. Use the appropriate number of people and proper lifting techniques.

5Return the sliding T-handle to the stowed position.

TILTBACK OPERATION INSTRUCTIONS

Stowing the Tilt-back Assembly

1 Remove the retaining pin.

2Firmly grasp the tilt-back frame and remove the tilt-back strut from the strut socket.

3Lift the tilt-back frame, hold in an upright position against the spring and secure with the retaining pin.

Part No. 114002

Genie AWP Super Series

27

Page 29
Image 29
Genie 114002 manual Returning the Machine to Standing Position, Stowing the Tilt-back Assembly