Genie GPOWER 900 One-Piece Doors, Attaching door braCket tO door, Door centerline, 3/8 Lock nut

5 One-Piece Doors

Attaching door braCket tO door

1	Using bracket, mark holes on door or frame and drill
	5/32" hole completely through door frame.

Door centerline

NOTE: Center bracket on door as high as possible, preferably top edge.

Attaching door arm tO door braCket

1a Screw drive models:

One-Piece Doors will only accept a straight door arm.

Curved door arm

3/8"-16 x 7/8"

Bolt

3/8"Lock nut

Straight door arm (not included)

2

Secure bracket with 5/16" x 2" or 5/16" x 4-1/2" carriage bolts and nuts or drill 1/8" pilot holes and secure with 1-1/2" to 2" lag bolts. (Bolts, nuts, and screws not furnished.)

1b Chain/belt drive models:

One-Piece Doors will only accept a straight door arm.

	Straight door arm
3/8"-16 x 7/8"	3/8" Lock nut
Bolt

Straight door arm (not included)

2	Secure door arm to the door bracket and with clevis pin
	and cotter pin.

Cotter pin

Door bracket

Straight door arm

	Clevis pin
	15
G999-393 Manual-ScrewBeltChain-EN indd 15	7/13/12 10 17 AM