Wall Console / Overview

3 Required Programming

Wall Console / Overview

This opener has a serial

MODEL AC SR3

THE GENIE COMPANY

number sticker in which

FCC ID: B8Q AC SR3

Residential Door Operator

IC: 2 33A-CS 1D

120V. 60HZ. 5A

the serial numbers begin

S/N:10XXXX XXXXXXX

 

with 10 or higher.

 

 

 

 

 

 

Wall consoles from other manufacturers may not work with openers of these serial number groups. Use only the wall console provided with this unit. Each wall console has three buttons.

In your carton you will find one of the following wall consoles:

Series II Wall Consoles with White Buttons

Indicator Light

Large white button will display Red when wall console is properly wired and Sure-Lockis OFF. When Sure-Lockis ON, this light is off

Open/Close Button

Use this button to open or close garage door. When Sure-Lock™ is ON, the Open/Close button will CLOSE the door only.

NoTE: Constant button pressure in the CLOSE mode will override STB fault in the powerhead and close door.

Independent Light Control Button

Series III Wall Consoles with Black Buttons

Indicator Light

Indicator light will display Red when wall console is properly wired and Sure-Lockis OFF. When Sure-Lockis ON, indicator light flashes.

Open/Close Button

Use this button to open or close garage door. When Sure-Lock™ is ON, the Open/Close button will CLOSE the door only.

NoTE: Constant button pressure in the CLOSE mode will override STB fault in the powerhead and close door.

Independent Light Control Button

Use this button to turn powerhead lights ON. Powerhead lighting will remain ON until this button is pressed again or a door action has been completed.

NoTE: If opener has a Motion Detector sensor, it will keep powerhead lights ON as long as motion is detected.

Sure-LockButton

When Sure-Lockis ON, the powerhead cannot be activated by the wall console or a remote.

Press and hold for 5 seconds (or until Indicator Light flashes) to activate Sure-Lock.

Press and release to turn Sure-LockOFF.

Use this button to turn powerhead lights ON. Powerhead lighting will remain ON until this button is pressed again or a door action has been completed.

NoTE: If opener has a Motion Detector sensor, it will keep powerhead lights ON as long as motion is detected.

Sure-LockButton

When Sure-Lockis ON, the powerhead cannot be activated by the wall console or a remote.

Press and release (or until red light goes off) to activate Sure-Lock.

Press and release to turn Sure-LockOFF.

Open/Close Button

Opens and closes door from inside garage.

Indicator Light –Red indicator light is

always ON.

–When Sure-Lock™ is ON, the indicator light flashes.

Sure-Lock™ Button

– LOCK disables controls after door is completely closed.

UNLOCK allows controls to work normally.

To powerhead

W

B/W

Open/Close Button

Opens and closes door from inside garage.

Indicator Light

–Red indicator backlight is ON. –When Sure-Lock™ is

ON, the indicator light is OFF

Sure-Lock™ Button

– LOCK disables controls after door is completely closed.

– UNLOCK allows controls to work normally.

To powerhead

W

B/W

Independent Light Control Button

Controls door opener lights from inside garage.

TIP

FROM STBs

 

FROM STBs

 

FROM WALL

 

FROM WALL

 

CONSOLE

 

CONSOLE

 

 

NOT NOT

USED USED

Independent Light Control Button

Controls door opener lights from inside garage.

8

G999-393 Manual-ScrewBeltChain-EN indd 8

7/13/12 10 17 AM

Page 8
Image 8
Genie SC 1200/1500, GPOWER 900 Wall Console / Overview, In your carton you will find one of the following wall consoles

TRILOG 1200/1500, SC 1200/1500, SILENTMAX 1000/1200, 1200/1500, GPOWER 900 specifications

The Genie TRUE, GPOWER 900, 1200, POWERLIFT 900, and 1500 are renowned products in the field of material handling, specifically designed to enhance efficiency and safety in various lifting applications.

The Genie TRUE is characterized by its innovative design that combines user-friendliness with advanced engineering. This model offers an impressive lift capacity while ensuring stability and performance. Its lightweight structure allows for easy maneuverability, making it ideal for both indoor and outdoor use. The Genie TRUE is equipped with a state-of-the-art control system that provides precise lifting, lowering, and positioning, ensuring maximum productivity for operators.

The GPOWER 900 and 1200 models stand out with their robust build and exceptional lifting capabilities. The GPOWER 900 is designed to handle loads up to 900 pounds, while the GPOWER 1200 can effortlessly lift up to 1200 pounds. Both models use advanced hydraulic systems for smooth operation, allowing for quick lifting cycles without compromising on power or safety. The ergonomic design of the GPOWER series minimizes operator fatigue, making it suitable for prolonged use in various work environments.

The POWERLIFT 900 and 1500 augment this lineup with their impressive features tailored for heavy-duty use. The POWERLIFT 900 can lift loads up to 900 pounds, making it ideal for medium-sized tasks. On the other hand, the POWERLIFT 1500 is engineered for heavier loads, boasting a capacity of 1500 pounds. Both models utilize cutting-edge overload protection technology, ensuring that safety is prioritized during use. Additionally, the POWERLIFT series features an intuitive interface that facilitates easy adjustments and control during operation.

Each of these models embodies the core values of Genie: reliability, innovation, and efficiency. They are designed to meet the varying demands of different industries, including construction, warehousing, and logistics. Their modular designs and interchangeable parts further enhance their versatility and longevity, making them a worthwhile investment for any business needing lifting solutions.

In summary, the Genie TRUE, GPOWER 900, 1200, POWERLIFT 900, and 1500 combine robust performance with safety and ease of use, making them ideal choices for any lifting task. Their reliability and advanced features are sure to meet the growing demands of modern workplaces.