![](/images/new-backgrounds/1173085/17308551x1.webp)
English
3) ATX (ATX Power Connector)
AC power cord should only be connected to your power supply unit after ATX power cable and other related devices are firmly connected to the mainboard.
|
| Pin No. | Definition |
|
| 1 | 3.3V |
10 | 20 | 2 | 3.3V |
3 | GND | ||
|
| 4 | VCC |
|
| 5 | GND |
|
| 6 | VCC |
|
| 7 | GND |
|
| 8 | Power Good |
|
| 9 | 5V SB (stand by +5V) |
|
| 10 | +12V |
|
| 11 | 3.3V |
1 | 11 | 12 | |
13 | GND | ||
|
| 14 | PS_ON(soft on/off) |
|
| 15 | GND |
|
| 16 | GND |
|
| 17 | GND |
|
| 18 | |
|
| 19 | VCC |
|
| 20 | VCC |
4) IDE1/ IDE2(IDE1/IDE2 Connector)
Please connect first harddisk to IDE1 and connect CDROM to IDE2. The red stripe of the ribbon cable must be the same side with the Pin1.
1 | 39 |
IDE2
IDE1
2 | 40 |
- 22 - |