Gigabyte GA-7VT600 Frequency/Voltage Control, Spread Spectrum Modulated, CPU Host Clock Control

Frequency/Voltage Control

CMOS Setup Utility-Copyright (C) 1984-2003 Award Software

Frequency/Voltage Control

Spread Spectrum Modulated	[Enabled]	Item Help
CPU Host Clock Control	[Disable]	Menu Level
ÚCPU Host Frequency(MHz)	133
ÚPCI/AGP Frequency(MHz)	33/66
DRAM Clock(MHz)	[Auto]
CPU OverVoltage Control	[Auto]
AGP OverVoltage Control	[Auto]
DIMM OverVoltage Control	[Auto]

: Move	Enter:Select	+/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values		F6:Fail-Safe Defaults	F7:Optimized Defaults
	Figure 8: Frequency/Voltage Control

ÚThose items will be available when "CPU Host Clock Control" is set to Enabled.

)Spread Spectrum Modulated

Disabled	Disable clock spread spectrum.
Enabled	Enable clock spread spectrum.(Default value)

)CPU Host Clock Control

Note: If system hangs up before enter CMOS setup utility, wait for 20 sec for times out reboot . When time out occur, system will reset and run at CPU default Host clock at next boot.

Disable	Disable CPU Host Clock Control.(Default value)
Enable	Enable CPU Host Clock Control.

)CPU Host Frequency (MHz) (By switch SW1)

100	Set CPU Host Clock to 100MHz~132MHz.
133	Set CPU Host Clock to 133MHz~165MHz.
166	Set CPU Host Clock to 166MHz~200MHz.
200	Set CPU Host Clock to 200MHz~254MHz.

English

- 49 - BIOS Setup