Question 6: Why does system seem unstable after updating BIOS?
Answer: Please remember to load
Question 7: Why do I still get a weak sound after turning up the speaker to the maximum volume?
Answer: Please make sure the speaker you are using is equipped with an internal amplifier. If not, please change another speaker with power/amplifier and try again later.
Question 8: How do I disable onboard VGA card in order to add an external VGA card?
Answer: Gigabyte motherboards will
Question 9: Why cannot I use the IDE 2?
Answer: Please refer to the user manual and check whether you have connected any cable that is not provided with the motherboard package to the USB Over Current pin in the Front USB Panel. If the cable is your own cable, please remove it from this pin and do not connect any of your own cables to it.
Question 10: Sometimes I hear different continuous beeps from computer after system boots up. What do these beeps usually stand for?
Answer: The beep codes below may help you identify the possible computer problems. However, they are only for reference purposes. The situations might differ from case to case.
JAMI BIOS Beep Codes | J AWARD BIOS Beep Codes | |
*Computer gives 1 short beep when system boots successfully1 short:. System boots successfully | ||
*Except for beep code 8, these codes are always fatal. | 2 short: CMOS setting error | |
1 beep Refresh failure | 1 long 1 short: DRAM or M/B error | |
2 | beeps Parity error | 1 long 2 short: Monitor or display card error |
3 | beeps Base 64K memory failure | 1 long 3 short: Keyboard error |
4 beeps Timer not operational | 1 long 9 short: BIOS ROM error | |
5 beeps Processor error | Continuous long beeps: DRAM error | |
6 beeps 8042 - gate A20 failure | Continuous short beeps: Power error | |
7 | beeps Processor exception interrupt error |
|
8 | beeps Display memory read/write failure |
|
9 beeps ROM checksum error
10 beeps CMOS shutdown register read/write error
11 beeps Cache memory bad
English
- 91 - | Appendix |
