Gigabyte GA-7VT600 manual PCI/AGPFrequencyMHz, DRAMClockMHz, CPU OverVoltage Control

English

)PCI/AGPFrequency(MHz)

The values depend on CPU Host Frequency(Mhz) .

)DRAMClock(MHz)

Please set DRAM Clock according to your requirement. (Default value: Auto)

If you use DDR266 DRAM module, please set "DRAM Clock(MHz)" to "133-DDR266". If you use DDR333 DRAM module, please set "DRAM Clock(MHz)" to "166-DDR333". If you use DDR400 DRAM module, please set "DRAM Clock(MHz)" to "200-DDR400".

Incorrect using it may cause your system broken. For power End-User use only!

)CPU OverVoltage Control

Increase CPU voltage may get stable for Over_Clock. But it may damage to CPU when enable this feature.

AutoSupply voltage as CPU reguired. (Default value)

+5% / +7.5% / +10% Increase voltage range as user selected.

)AGPOverVoltage Control

Increase AGP voltage may get stable for Over_Clock. But it may damage to AGP Card when enable this feature.

AutoSupply voltage as AGP Card reguired. (Default value)

+0.1V ~ +0.3V Set AGP voltage from 1.6V~1.8V.

)DIMMOverVoltageControl

Increase DRAM voltage may get stable for Over_Clock. But it may damage to DRAM module when enable this feature.

AutoSupply voltage as DRAM module reguired. (Default value)

+0.1V ~ +0.3V Set DIMM voltage from 2.6V~2.8V.

GA-7VT600(-L) Motherboard - 50 -