Gigabyte GA-7VT600 manual Troubleshooting

Models: GA-7VT600

1 104
Download 104 pages 9.48 Kb
Page 97
Image 97

Troubleshooting

If you encounter any trouble during boot up, please follow the troubleshooting procedures.

START

Turn off the power and unplug the AC power cable, then remove all of the add-on cards and cables from motherboard.

Please make sure motherboard & chassis are not short ?

 

 

Yes

Please isolate

 

 

 

 

the short pin.

 

 

 

 

 

 

 

 

 

 

 

 

No

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Failure has been excluded.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Please make sure all jumper settings (such as CPU system bus

 

 

No

Make sure the

 

 

jumper setting

 

 

 

 

speed, frequency ratio, voltage and etc.) are set properly.

 

 

 

 

are correct.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Yes

 

 

 

 

 

 

 

 

 

 

 

 

Failure has been excluded.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Plug the CPU

 

 

 

 

 

 

 

 

 

 

No

cooling fan power

Check if the CPU cooling fan attached to CPU properly. ls

 

 

in the CPU fan

 

 

 

 

connector. Plug

CPU cooling fan power connected to CPU_FAN

 

 

 

 

in the AC power

properly?

 

 

 

 

connector.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Yes

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Failure has been excluded.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

No

Insert and push

Check if the memory install properly into the DIMM slot.

 

 

the memory

 

 

 

 

module vertically

 

 

 

 

 

 

 

 

 

 

 

 

into the DIMM

Yes

 

 

 

 

 

 

 

 

 

 

 

slot.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Failure has been excluded.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Insert the VGA card. Then plug in ATX power cable and turn on the system.

A

English

- 93 -

Appendix

Page 97
Image 97
Gigabyte GA-7VT600 manual Troubleshooting