Gigabyte GA-K8VM800M user manual Delete Disk Array, Select Boot Array

Models: GA-K8VM800M

1 96
Download 96 pages 19.91 Kb
Page 80
Image 80

English

Delete Disk Array

A RAID can be deleted after it has been created . To delete a RAID, use the following steps:

1.Select Delete Array in the main m enu and press <Enter>. The channel colum n will be activated.

2.Select the member of an array that is to be deleted and press <Enter>. A warning m essage will show up, press Y to delete or press N to cancel.

VIA Technologies,Inc. VIA VT8237 Serial ATA BIOS Setting Utility V1.20

uCreate Array

uDelete Array

uCreate/Delete Spare

uSelect Boot Array

uSerialNumber View

The selected array will be destoried. Are you sure? Continue? Press Y/N

Delete a RAID array contain the hard disks attached to VIA IDE controller

F1

: View Array/disk Status

h,i

: Move to next item

Enter

: Confirm the selection

ESC

: Exit

Channel

Driver Name

ArrayName

Mode

Size(GB)

Status

[*]Serial_Ch0 Master

ST380013AS

 

SATA

74.53

Stripe0

[*]Serial_Ch1 Master

ST9120023AS

 

SATA

111. 79

Stripe1

Deleting a disk array will destroy all the data on the disk array except RAID 1 arrays. When a RAID is deleted, the data on these two hard disk drives will be reserved and become two normal disk drives.

Select Boot Array

User can select a disk array as boot device if user wants to boot operating system from an array. Boot disk array cannot be selected if the operating system does not boot from the disk array. Highlight the Select Boot Array item; press <Enter> and the channel column will be activated. Then highlight the target disk array and press <Enter>. If user selects a disk array that has a boot mark and press <Enter>, its boot setting will be canceled.

VIA Technologies,Inc. VIA VT8237 Serial ATA BIOS Setting Utility V1.20

uCreate Array

uDelete Array

uCreate/Delete Spare

uSelect Boot Array

uSerialNumber View

Set/Clear bootable array

F1 : View Array/disk Status

h,i : Move to next item

Enter : Confirm the selection

ESC : Exit

Channel

Driver Name

ArrayName

Mode

Size(GB)

Status

[*]Serial_Ch0 Master

ST380013AS

 

SATA

74.53

Stripe0

[*]Serial_Ch1 Master

ST9120023AS

 

SATA

111. 79

Stripe1

GA-K8VM800M Motherboard

- 80 -

Page 80
Image 80
Gigabyte GA-K8VM800M user manual Delete Disk Array, Select Boot Array