Bios file becomes Fab after updating | Gigabyte GA-K8VM800M specs

4. Press any keys to return to the Q-Flash menu when the BIOS updating procedure is completed.

Dual BIOS Utility

	Wide Range Protection	Disable
	Boot From	Main Bios
	Auto Recovery	Enable
	Halt On Error	Disable
	Copy Main ROM Data to Backup
	!! Copy BIOS completed - Pass !!
	Load Default Settings
	PleaseSavepressSettingsany keytoCMOSto continue
	Q-Flash Utility
	Load Main BIOS from Floppy
	Load Backup BIOS from Floppy
	Save Main BIOS to Floppy
	Save Backup BIOS to Floppy
Enter : Run	hi:Move	ESC:Reset	F10:Power Off

You can repeat Step 1 to 4 to flash the backup BIOS, too.

5. Press Esc and then Y button to exit the Q-Flash utility. The computer will restart automatically after you exit Q-Flash.

Dual BIOS Utility

	Copy Main ROM Data to Backup
	Are you sure to RESET ?
	Load Default Settings
	[Enter] SavetocontinureSettingsorto[Esc]CMOSto abort...
		Q-Flash Utility
	Load Main BIOS from Floppy
	Load Backup BIOS from Floppy
	Save Main BIOS to Floppy
	Save Backup BIOS to Floppy
Enter : Run	hi:Move	ESC:Reset	F10:Power Off

After system reboots, you may find the BIOS version on your boot screen becomes the one you flashed.

The BIOS file becomes Fab after updating

Intel i875P AGPset BIOS for 8KNXP Ultra Fba Check System Health OK , VCore = 1.5250

Main Processor : Intel Pentium(R) 4 1.6GHz (133x12)

Memory Testing : 131072K OK

Memory Frequency 266 MHz in Single Channel

Primary Master : FUJITSU MPE3170AT ED-03-08

Primary Slave : None

Secondary Master : CREATIVEDVD-RM DVD1242E BC101

Secondary Slave : None

Press DEL to enter SETUP / Dual BIOS / Q-Flash / F9 For Xpress Recovery 09/23/2003-i875P-6A79BG03C-00

GA-K8VM800M Motherboard

- 58 -