Fit the ho b i nto the cu tout & secure to worktop
Place the ho b in to the cuto ut and secure in place using the four brackets and screws provided.
The bra ckets should be ori entated to suit the wo rktop thickness a s shown, then inserted into the four slots (two on the front edge and two on the rea r) and screwed into the underside of the worktop using the woodscrews provid- ed.
40mm seal worktop
seal
hob
30mm worktop
hob
The scr ews should b e ti ghtened just sufficiently to secure the hob and pull the top press ing fl ush with the work- top.
If t he bas e o f the hob i s ac cessible after installation then a partition must be fitted 20mm below the base to pre- vent access.
15
