Connect gas hob to gas supply
The inlet is at the rear RHS of the hob. The hob may be connected to the gas supply either by rigid pipework or flex- ible connection.
Flexible connections
Use a 900mm - 1125mm le ngth of flexible c onnector. Ensure that the hose is installed hanging freely down- wards, is not trapped, is not subjected to undue forces and is not supported at the bottom by a horizontal surface.
Natural Gas - Flexible connections should comply with BS669, latest edi- tion.
LP Gas - For flexible connections use a bayonet type hose, suitable for use on LP gas up to 50 mbar pressure rise and 70˚C temperature rise. The f lexi- ble hos e sho uld be colo ured bl ack with a red stripe, band or label. If in doubt, contact your supplier.
The installatio n mu st ensu re that the flexible tube cannot come into contact with movable parts of the housing unit (eg; a drawer) a nd d oes not pass throughany space susceptibleto becoming congested.
Make sure the appliance is gas sound & al l com ponents a re operating correctly.
Connect to the electricity supply
Unless this appliance is supplied with a fitted plug, it m ust be co nnected by a competent person, u sing fixed wiring via a dou ble pole switched fused spur outlet, with a contact separation of 3mm at all poles.
Connect the mains l ead wi res to the terminals:
The blue wire must be connected to the terminal m arked N (Neutral) LOAD or coloured black. The brown wire must be connected to the terminal marked L (Live) LOAD or coloured red.
The green/yellow coloured wire must be con nected to the terminal m arked E 
(Earth) or c oloured green. Warning: this appliance must be earthed.
The fused spur must be accessible after installation.
If the supply cord is damaged, obtain a special cord from the Customer Care Helpline, w hich mu st b e fi tted by a qualified person.
18
