GN Netcom 9p23 manual Mobility Server, Answer a call, Message waiting indication

Mobility Server

Standby Mode

When the 9p23 portable handset is in Standby mode, the MLA icon indicates which handset line will be active the next time the handset is used to place a call (see Figure 7.1).

Select Line

To select another line, use the Left Soft key to choose Menu. Use the up and down arrows of the Scroll key to Scroll to the Settings menu and use the Left Soft key to select this menu.

In the Settings menu, use the Left Soft key to select Call Options, then use the Left Soft key to choose Select Line. Use the up and down arrows of the Scroll key to view available (idle) lines. Once the desired line is displayed, use the Left Soft key to choose Connect (see Figure 7.2).

Answer a call

An incoming call to the 9p23 portable handset can be indicated by any or all of the following:

•Audible ring tone

•Display message

•Flashing Off Hook icon

•Lighted display

•Flashing red light indicator

•Vibration of handset

Option 1

Ignore the call

Option 2

Answer the call by pressing the Off Hook key or the Left Soft key to select Accept.

17

Option 3

Decline the call by pressing the Right Soft key to select Decline.

Option 4

Mute the call by pressing the Mute button.

Option 5

Use the up and down arrows of the Scroll key to review the status of all lines. Selecting a non-ringing (idle) line will access a new line and generate a new dial tone. To answer an incoming call on another ringing line, press the Off Hook key or the Left Soft key to choose Accept.

The options above also apply to call waiting.

Message waiting indication

The 9p23 portable handset is capable of displaying a Voice Mail icon. In order for the Voice Mail icon to automatically disappear after listening to messages, voice mail must be accessed through the Mobility Server Personal Assistant feature.

Consult your system administrator for more information on the Personal Assistant feature.

If Voice Mail is not accessed through the Personal Assistant feature of the MS, the Voice Mail icon will not automatically disappear. The Voice Mail icon must be manually removed by pressing #, 9,1, #, On, then Off.

Mobility Server configuration is applicable when there is a PRI interface to the PBX. Confirm with the system administrator that the installation supports en- hanced features such as caller line ID and Multiple Line Appearance (MLA). To access features such as transfer, conference, hold, and reconnect, callback and cancel callback, please refer to the In Call Menu Options section of this guide.