16.Orient the Center Upright (13) as shown and insert it into the Base (14). Hold the Foot Plate (15) and the Weight Carriage Base (20) against the Base. Attach the Foot Plate, Center Upright, and Weight Carriage Base to the Base with two M10 x 110mm Screws (130). Do not tighten the
Screws yet.
Attach the Foot Plate (15) to the Center Upright
(13)with an M10 x 93mm Bolt (129), an M10 Washer (148), and an M10 Nylon Locknut (153).
17.Attach the Top Frame (17) to the Rear Uprights (12) with four M10 x 110mm Screws (130) and four M10 Washers (148). Do not tighten the
Screws yet.
Attach the Top Frame (17) to the Front Uprights (11) in the same way.
Press four 75mm Square Inner Caps (95) into the corners of the Top Frame (17).
16 |
|
|
|
| Bracket |
| 13 | 153 |
|
| 148 |
129 |
| 20 |
|
| |
130 |
| 14 |
|
| |
| 15 |
|
17 | 95 |
|
| 130 |
|
| 148 |
|
|
| 17 |
|
| 95 |
|
| 130 |
| 12 | 148 |
| 95 | |
|
| 12 |
|
| 148 |
| 11 | 130 |
13
