Gold's Gym GGBE8057.0 manual Locknut 153. Make sure that the Cable Trap is

37. Wrap the Arm Cable (145) over a “V”-pulley (75).	37
Attach the “V”-pulley, a Large Cable Trap (77),
	133
and two Full Pulley Guards (76) to the other side
of the bracket on the Center Upright (13) with an	76		75
M10 x 60mm Bolt (133) and an M10 Nylon		77
Locknut (153). Make sure that the Cable Trap is			145
oriented to hold the Cable in the groove of the
“V”-pulley.			76
			153
			13
38. Grease an M8 x 22mm Shoulder Bolt (143).	38
Attach the Arm Cable (145) to the Right
Adjustment Bracket (24) with the Shoulder Bolt			Grease
and an M8 Nylon Locknut (170). See the inset
			143
drawing. Make sure that the flat edge of the
			145
cable is against the Adjustment Bracket. Do
not overtighten the Shoulder Bolt; the Cable
must pivot easily.
			24
			170
			143
			145
			24
			170
39. Identify the High Cable (81). Feed the Cable	39		Slot
under the indicated rod into the right Swivel
Bracket (31). Continue feeding the Cable into the	127		17
Top Frame (17), and then pull the end of the
	148
Cable out of the indicated slot in the Top Frame.		31
Wrap the High Cable (81) over a Large Pulley	151
(165). Attach the Large Pulley to the Swivel	Rod		153
Bracket (31) with an M10 x 55mm Bolt (127), two
M10 Washers (148), two M10 x 6.5mm Spacers	165		151 148
(151), and an M10 Nylon Locknut (153).	81
	Ball
	21