45.Feed the High Cable (81) through the indicated slot in the Top Frame (17). Wrap the Cable around a Small Pulley (74). Attach the Small Pulley to the Top Frame with an M10 x 45mm Bolt (140) and an M10 Nylon Locknut (153).
46.Feed the High Cable (81) through the Top Frame
See the inset drawing. Insert the Cabling Rod
(175)into the left Swivel Bracket (31) and the Top Frame (17). Attach the Cabling Rod to the High Cable (81). Then, pull the Cabling Rod and the Cable out of the Swivel Bracket. Make sure that the Cable is under the indicated rod.
Wrap the High Cable (81) around a Small Pulley (74). Attach the Small Pulley to the Top Frame with an M10 x 45mm Bolt (140) and an M10 Nylon Locknut (153).
45 | 140 |
| |
Slot |
|
74 | 17 |
| |
81 | 153 |
46 |
|
17 |
|
| 140 |
| 81 |
| 74 |
31 | 153 |
Rod |
|
| 81 |
| 17 |
31 |
|
175
Rod
24
