11

3 - Copy

COPY SETTINGS
NOTES
Complete Program Record (CPR) changes the copy speed from SP to SLP if necessary to reduce the risk
of running out of tape before copying is complete.
EZ Copy: If the tape runs out in Deck 2 before copying is complete, neither tape will rewind to alert you
that a problem occurred.

Follow these steps to set the default Copy

Settings for your Dual-Deck VCR.

1 OPEN MAIN MENU
Press MENU.
2 SELECT “COPY SETTINGS”
Press 1.
3 ADJUST COPY SETTINGS
Press 1, 2, 3 or 4 to set each of the following:
1 - Comm. Free Copy
Please refer to page 26.
2 - EZ Copy
On – Turns EZ Copy on. When you press
COPY TAPE, the VCR will automatically
rewind both decks, copy the tape in Deck
1 to Deck 2, rewind both decks again,
and eject the tapes. Plus, EZ Copy adjusts
the record speed to avoid running out of
tape before copying is complete; see
note on “Complete Program Record”
below.
Off – Turns EZ Copy off.
3 - Speed Matching
On – Automatically sets the Deck 2
record speed to match the Deck 1 play-
back speed (recommended for best copy
quality).
Off – Allows the Deck 2 record speed to
be set independently of the Deck 1
playback speed. Turn Speed Matching off
only if you want to record two or more SP
tapes onto one SLP tape. You must set
the Deck 2 record speed to SLP manually;
see page 14.
Auto – Automatically adjusts the Deck 2
record speed to avoid running out of
tape before copying is complete; see
note on “Complete Program Record”
below.
4 - Copy Audio Insert
Please refer to page 21.
4
3
press
press
press
COPY SETTINGS
1 Comm. Free Copy On
2 EZ Copy Off
3 Speed Matching On
4 Copy Audio Insert Off
/ = Move = Sel MENU = Quit
MENU
1 Copy Settings
2 Playback Settings
3 Record/Edit Settings
4 Channel Settings
5 VCR Settings
6 Timer Recording
7 Language/Langue
/ = Move = Sel MENU = Quit
1
1
2
for
Comm. Free Copy
for
EZ Copy
for
Speed Matching
for
Copy Audio Inser
t
MAIN MENU