DC-B86B1N-PS 04.5.20 9:29 PM 페이지20

VCR PLAYBACK

1

Press [POWER] to turn on the DVD/VCR.

Press [VCR] to select VCR mode.

2

Insert the desired tape.

3

To start playback, press [PLAY].

If the picture is flickering or poor quality, adjust it with the [TRK +/–]

buttons.

4

To stop playback, press [ ].

To pause playback, press [PLAY].

Press [PLAY] again to resume playback.

5

Press [VCR EJECT] on the unit or [EJECT] on the remote

control to eject the tape.

If the VCR detects contaminated head(s), it shows an on-screen message to bring this to your attention.

*If you see this message, clean the video heads with a commercial head- cleaner.

Various Playback Methods

For fast forward (or reverse) playback, press [√√] (or [œœ]) in Playback mode.

For slow-motion playback, pause the playback, then press [√√].

*NOTE: The VCR does not have Slow Reverse Playback.

For Frame Advance, pause the playback, then press []. Each time you press this button, the picture advances one frame.

For Still picture, press [PLAY] in Playback mode.

To Adjust Display

This product includes automatic Tracking so you can enjoy a clear picture without additional operation. However:

-If the screen is poor in Playback mode,

-If noises occur in the upper or lower part of the screen in slow playback mode,

-If paused picture vibrates up and down.

Then try using the [TRK +/–] buttons to adjust the display manually.

20

Page 21
Image 21
GoVideo DV1030 manual VCR Playback