Selecting DIGITAL OUT.

Set audio output to coaxial or optical. You
can set the outgoing digital signal to
BITSTREAM or LPCM:
•BITSTREAM : The raw audio signal
recorded on the disc goes to the digital
audio output.
•LPCM: The decoded audio signal goes to the digital audio
output.
2
■To set the DVD+VCR to match the capabilities of your audio system:
While in Stop mode, press
[SETUP].
1

Select a Dynamic Range

You can set the Dynamic Range as
follows:
•Off : You can hear the sound as it was
originally recorded on the disc.
•Full: You can hear loud sounds softer
and soft sounds louder.
3
48
DIGITAL OUT
DYNAMIC RANGE
BITSTREAM
OFF
DIGITALOUT
DYNAMIC RANGE
BITSTREAM
✓
LPCM
DIGITAL OUT
DYNAMIC RANGE
FULL
OFF
✓
AUDIO SETUP