23
VCR OPERATION

To Delete Channels Manually

■To delete memorized channels:
■This feature is useful if your cable signal goes out because it allows you to switch to a regular
antenna for alternate television reception.
■This feature is useful if your cable signal goes out. It allows you to switch to a regular antenna for
alternate television reception.
■Use this option to change the VCR ’s output channel.The default is channel 3.
1Press [VCR], then press [SETUP] and select
“CHANNEL SET”. Select “Add/Remove
Channels”.
ADD/REMOVE CHANNELS
Channel 02
is now REMOVED.
MEMORIZING TV CHANNELS

Selecting cable or antenna viewing

To set the signal type:
Press [ENTER] to toggle the setting between CABLE
and ANTENNA in the CHANNEL SET screen.
When the desired signal type is displayed, press
[SETUP] twice to exit.
CHANNEL SET
Auto Channel Search
Add/Remove Channels
Signal Type: CABLE
Cable Box Setup
Channel Change: CH3

To Set Cable Box

To Set Output Channel

Press [VCR], then press [SETUP] and select
“CHANNEL SET”. Select “Channel
Change” (or “RF Output”).
Press [ENTER] to set the RF Output channel to
CH3 or CH4.
Press [VCR], then press [SETUP] and
select “CHANNEL SET”.
Select “Cable Box Setup”.
1
Select “Cable Box Channel”.
Enter the channel number which matches
to the output of the Cable Box.
2CABLE BOX SETUP
On what channel does
the VCR receive signals
from the cable box?
(usually 3, 4 or video)
- -
CHANNEL SET
Auto Channel Search
Add/Remove Channels
Signal Type: CABLE
Cable Box Setup
Channel Change: CH3
CHANNEL SET
Auto Channel Search
Add/Remove Channels
Signal Type: CABLE
Cable Box Setup
Channel Change: CH3
(RF Output)
2Select the desired channel and delete it.
Use the [0-9] buttons to select the desired channel to delete.
When [œ] is pressed, “ADDED” under the channel number changes to
“REMOVED”.
3To check the deleted channel, press [CH+/–] on the remote control.