GoVideo DV1030 manual Connecting to a TV, Various methods of connecting your TV

DC-B86B1N-PS 04.5.20 9:28 PM 페이지12

CONNECTING TO A TV

■The default RF Output channel is CH3. If Channel 3 is used by a TV station, you must change it to Channel 4. See "To Set Output Channel" on page 23.

Various methods of connecting your TV

Rear Panel of DVD+VCR

DVD ONLY				DVD + VCR
AUDIO	COMPONENT	VIDEO	VIDEO 1	IN
OUT	VIDEO OUT	OUT	IN

			Y
		R			R
			Pr		AUDIO
					RF
		L		S-VIDEO OUT	L
		COAXIAL	Pb
		DIGITAL			VIDEO
		AUDIO OUT
					OUT
					(TO TV)
	ANT INPUT				Method 1
	A/V INPUT
	AUDIO				Method 2
	VIDEO
Rear Panel of TV	COMPONENT INPUT				Outside Antenna or Wall
					Antenna Outlet
		Method 3
	S-VIDEO INPUT	Method 4
	S-VIDEO

Method 1

Unplug the RF cable from the “ANT.IN” Jack on the rear panel of the TV. Plug this cable into the

“ANT.IN” jack on the rear panel of the DVD+VCR. Connect the “RF OUT” jack on the DVD+VCR to the “ANT.IN” jack on the TV with another RF cable.

If your cable system provides all your channels, connect an RF Cable from the OUT jack of the Cable Box to the "IN From Antenna" jack on the DVD+VCR unit.

Method 2 : Connecting to a TV equipped with audio/video in jacks

Use the supplied audio/video cable to connect the Video Out jack on the DVD+VCR to the Video In jack on your TV. Connect the Audio Out jack on the DVD+VCR to the Audio In jack on the TV. Match the color of the cable to the color of the jack.

Method 3 : Connecting to a TV equipped with component video in jacks

Connect component video cables (not supplied) from the Component Video Out jacks on the DVD+VCR to the Component Video In jacks on the TV. If you do not receive a clear picture using the Component Video Pr, Pb, Y jacks, try connecting to the Cr, Cb, Y jacks instead. The component video connection only works in DVD playback mode.

To use the VCR or view TV channels, you still need to connect the RF cable or the audio/video cables.

Method 4 : Connecting to a TV equipped with S-Video in jacks

Connect an S-Video cable (not supplied) between the S-Video Out jack on the DVD+VCR to the S- Video In jack on the TV. The S-Video connection only works in DVD playback mode. To use the VCR or view TV channels, you still need to connect the RF cable or the audio/video cables.

• VHF: TV channels 2~13, UHF: TV channels 14~69, CATV: Cable TV

12