Graco 3A0420T important safety instructions Technical Data

		Technical Data
Technical Data
XP Proportioners
	U.S.	Metric
Maximum Fluid Working Pressure	See Models section beginning	on page 11.
Maximum Air/Hydraulic Oil Working Pressure	See Models section beginning on page 11.
Combined Fluid Output (cc/cycle)	See Models section beginning on page 11.
Pressure Ratio	See Models section beginning on page 11.
Fluid Flow at 40 cpm	See Models section beginning on page 11.
Hydraulic Fluid Consumption (XP-h models only)	0.2 gallons per cycle	0.76 liters per cycle
Air inlet size	3/4 npsm(f)
Maximum air pressure supply to the system	175 psi	12 bar, 1 MPa
Fluid pump inlets without hoppers	1-1/4 in. npsm(m)
Fluid gauge manifold outlets	1/2 in. npt(f)
Fluid mix manifold inlets	1/2 in. npt(f) ball valves
Mix manifold material outlet	1/2 in. npt(f)
Maximum feed pressure from remote source	250 psi	17 bar, 1.7 MPa
Sound pressure	86 dBA at 100 psi (7 bar, 0.7	MPa)
Sound power	98 dBA at 100 psi (7 bar, 0.7 MPa)
Maximum Storage Time	5 years (To maintain original performance, replace soft
	seals after 5 years of inactivity.)
Maximum Lifetime	Indefinite with recommended maintenance and periodic
	rebuilds for critical parts.
Power Efficiency Factor (XP70)	75 cu. ft compressed air/1 gallon sprayed material at 100 psi
	2.12 m3 compressed air/1 liter sprayed material at 7 bar
	(0.7 MPa)
Air consumption per 1 gallon (3.78 l) of flow
XP70	75 scfm at 100 psi/gpm (2.12 m3/min at 7 bar, 0.7 MPa)
XP50	60 scfm at 100 psi/gpm (1.7 m3/min at 7 bar, 0.7 MPa)
XP35	50 scfm at 100 psi/gpm (1.42 m3/min at 7 bar, 0.7 MPa)
Filtration:
Air inlet filtration	40-micron filter/separator included
XP pump outlets	30 mesh
XTR Spray Gun	60 mesh
Fluid Viscosity Range:
Gravity feed with 7 gallon (26 liter) hoppers	200 to 20,000 cps (pourable)
Pressure feed	Any viscosity that will not require feed pressure more than
	15% of outlet pressure
Environmental Rating (Indoor/outdoor)
Hazardous Areas	EX II 2 G c IIA T2
	NOTE: XP-h pump packages (284xxx) are not Ex rated.
Ambient Temperature Range:
Operating	40-130°F	4-54°C
Storage	30-160°F	-1-71°C
Maximum Fluid Temperature	160°F	71°C
Wetted materials:
Housings and manifolds	Carbon steel with electroless nickel plating
Miscellaneous parts	Plated carbon steel, stainless steels, carbide, acetal, UHM-
	WPE, nylon, PTFE solvent resistant plastics
Pump packings	Carbon filled PTFE, proprietary UHMWPE
Flush pump suction tube	Aluminum
Hoses	Nylon core

3A0420T 57