Bare Proportioner Mounting Hole Dimensions | Graco 3A0420T manual

Dimensions

Bare Proportioner Mounting Hole Dimensions

The dimensions below is the minimum opening size for mounting a bare proportioner.

3/8-16 (4x)

10.125 in.

(257.175 mm)

5.06 in.

(128.52 mm)

120° (4x)

10.375 in.

(263.525 mm)

	150° (4x)
4.05 in.
(102.87 mm)	0.25 in.
	(6.35 mm)
	3.75 in.
	(95.25 mm)
	7.5 in.
	(190.5 mm)
	14.35 in.
	(364.49 mm)

2.25 in. (57.15 mm)

9.25 in.

(234.95 mm)

60

3A0420T

Image 60

Graco 3A0420T important safety instructions Bare Proportioner Mounting Hole Dimensions

Contents

XP Proportioners Contents Related Manuals Fire and Explosion Hazard Skin Injection Hazard Toxic Fluid or Fumes Hazard Important Two-Component Material Information Changing Materials B Component DesignationsEquipment Designations Overview UsageOver Pressure Protection Initial System Setup Models Cart-Mounted Systems Pump Volume Max Fluid Max Air Mix Gallon Bare Proportioning Pump Packages Building systems with bare proportioning pumpPackages Over Pressure Protection must be used, see Component Identification Mounting Components for Fluid Control Assembly Main Air Controls Solvent Flush Pump Kit 262393 optional Pump KeyAir Controls Fluid Line Accessories Flush Before Using EquipmentOptional Accessories Air Line Setup LocationGrounding Wire Systems with Explosion-Proof Heaters Hazardous location systems only Motor Position Check Motor PositionChange Motor Position Connect Air Supply Connect Fluid Hose Bundles Remote Mix Manifold OnlyConnect Static Mixers, Gun, and Hoses Pressure Relief Procedure Relieve a and B Fluid Pressure Prime Empty System Prime a and B Fluids Prime Solvent Flush Pump Heat Fluid Follow Prime Empty System, Spray To Adjust the Restrictor Side Mix Manifold Restriction Follow Pressure Relief Procedure, Flush Mixed MaterialFlush Mix Manifold, Hose, and Spray Gun Use Optional Solvent Pump Procedure Guidelines Shutdown Park System Verification Maintenance Troubleshooting Problem Cause Solution Pump Troubleshooting Hardener Pump FallingTrouble Area Resin Pump Leakage Resin Pump Pump Assembly Remove Pump AssemblyRemove Displacement Pump Repair Replace Air Control Assembly Remove MotorReplace Air Filter Element Replace System Air Regulator Air Control Assembly Air Flow Mix Manifold Assembly Fluid Circulation Manifold with Over Pressure Relief ValvesReplace Over Pressure Relief Valves Fluid Circulation Manifold Replacement Guide CirculationTarget Opening Manifold Valve Pressure Color Psi MPa, bar Use with Hoppers Optional Solvent Pump Service and Repair Optional Fluid HeatersReplace Parts Cart-Mounted System Standard Mix Manifold Models Quickset Mix Manifold Models Parts Common to All Systems Description Qty Washer Parts Varying By Model XP35 Systems Ref Part Description Coupling 283101 283102 283201 283202 283301 283302 283401 283402 Parts Varying By Model XP70 Systems Part Description Bare Proportioning Pump Package Model 571100 shown Parts Common to All Pump Packages Parts Varying by Pump Package Air Controls Qty Ref. No. Part No. Description Assembly 262784 XP35 262783 XP50 262806 XP70 Fluid Circulation Manifold with Over Pressure Relief ValvePart Description Qty Ref Manifold to also fit Series a XP Proportioners with Recommended Spare Parts Pump Repair KitsPump Filter O-rings packs Recirculation/Overpressure valve see Accessories and Kits Acceptable For Use in Explosive Atmospheres Not Approved For Explosive Atmospheres Technical Data Dimensions Top ViewSide View Floor Mounting Dimensions, Top View Bare Proportioner Mounting Hole Dimensions Wall Mount Bracket 262812 Dimensions Floor Stand 24M281 Dimensions Hydraulic Unit Dimensions Dimensions 3A0420T Graco Standard Warranty Graco Information