Graco 3A0420T Changing Materials, B Component Designations, Equipment Designations

Important Two-Component Material Information

Changing Materials

•Changing material types used in your system requires special attention to avoid equipment dam- age and downtime.

•Always clean the fluid inlet strainers after flushing.

•When changing between epoxies and urethanes or polyureas, disassemble and clean all fluid compo- nents and changes hose sets.

•Check with your material manufacturer for chemical compatibility.

•Most materials use ISO on the A side, but some use ISO on the B side.

•Epoxies often have amines on the B (hardener) side. Polyureas often have amines on the B (resin) side.

A and B Component Designations

Material suppliers and markets refer to plural component materials differently. The table below summarizes the differ- ent designations for the components used in various machines.

			Machine Left	Machine Right
Market	Equipment	Designations	Side	Side
		Letter	A	B
Foam and Polyurea, and	All Reactors, HFR™,	Color	Red	Blue
		Component Names	ISO, Hardener,	Polyol, Resin,
Urethane Pour	and VRM™		Catalyst	Base
		Major or Minor Component	Low Volume	High Volume
		(when not 1:1 mix)	Side	Side
		Letter	A	B
Epoxy and Urethane	Hydra-Cat®, Xtreme-	Color	Blue	Green
		Component Names	Resin, Base	Hardener, Cata-
Protective Coatings	Mix™, XM™, and XP			lyst
		Major or Minor Component	High Volume	Low Volume
		(when not 1:1 mix)	Side	Side
		Letter	A	B
Epoxy, Silicone, Ure-		Color	Red	Blue
	PR70™ and PR		Polyol, Resin,	ISO, Hardener,
thanes, and other mate-		Component Names
			Base	Catalyst
rials
		Major or Minor Component	High Volume	Low Volume
		(when not 1:1 mix)	Side	Side

8 3A0420T