Repair

Hoppers

1.If material is in the hopper pump out the remaining material.

2.If the pump has failed:

a.Place a waste container beneath the plug on fit- ting (61). Remove the plug.

b.Drain all material from hopper into the waste container.

c.Install plug after material is no longer draining from fitting (61).

r_571101_3a0420a_41a

plug 61

3.Follow Pressure Relief Procedure, page 22.

4.Loosen fitting (61) and disconnect hopper from pump.

5.Remove the recirculation line from the hopper and place in a waste container.

Optional Solvent Pump

1.Follow Pressure Relief Procedure, page 22.

2.Disconnect the fluid line and air lines from the sol- vent pump.

3.Loosen the four screws that attach the solvent pump to the cart (1). Lift and pull pump from the slots.

1

screw

4.Refer to the Merkur Pump Assembly manual to ser- vice or repair the solvent pump.

5.Follow the steps in reverse order to reinstall the sol- vent pump.

U

r_571101_3a0420a_18a

6.Lift the hopper off of the mounting bracket.

7.Repeat for second hopper.

40

3A0420T

Page 40
Image 40
Graco 3A0420T important safety instructions Hoppers, Optional Solvent Pump