EcoQuip Vapor Abrasive Blast System | Graco EQ300C instruction

Operation, Repair, and Parts

EcoQuip Vapor Abrasive

Blast System

334667B

EN

Vapor abrasive blast system. For professional use only. Not approved for use in explosive atmospheres or hazardous locations.

Important Safety Instructions

Read all warnings and instructions in this manual. Save these instructions.

125 psi (8.6 bar, 0.86 MPa) Maximum Working Pressure

See page 2 for Model information.

PROVEN QUALITY. LEADING TECHNOLOGY.

Image 1

Graco EQ300C manual EcoQuip Vapor Abrasive Blast System, Important Safety Instructions

Contents

EcoQuip Vapor Abrasive Blast System Important Safety Instructions Related Manuals Models Dust and Debris Hazard Burn Hazard Metric OEM System GuidelinesCompressor Size and Hose Length Minimum ID Metric EQ300C and EQ600C System Component Identification Key DataTrak ControlsDataTrak see DataTrak Controls, Pressure Relief Procedure Operation Checklist Before Starting Connecting the Blast Hose and Air Hose Setting Up the Equipment 10 gal 200-500 lb Ti24824a 0 0 0 8 8 0 0 0 3 Blasting on Higher Surfaces Blasting Tips Grit Size Blast Pressure Abrasive Dose Blast Angle General Metering Valve SettingsWood Steel Using the Wash Feature Refilling the Pot with Abrasive Shutting Down Operation Winterizing the Equipment Problem Cause Solution TroubleshootingSee Cleaning the Auto-Vent Valve, See Repairing the Main Air Regulator See Repairing the Diaphragm Valve See Setting Up the Equipment,Procedure see Shutting Down, Intact. See Hose Schematic, Metering Valve Settings, Properly. See Hose Schematic,See Pressure Relief Procedure, Setting Up the Equipment, If flushing does not solve the problem, see Checking for Leaks Troubleshooting Examples Pneumatic Blast Control Circuit Perform Pressure Relief Procedure, Repairing the Main Air RegulatorRepair Flushing the Diaphragm Valve Perform the Pressure Relief Procedure, Repairing the Diaphragm Valve Cleaning the Auto-Vent Valve Replace Battery Replacing the DataTrak BatteryApproved Batteries Replace Fuse Replacing the DataTrak FuseApproved Fuses DataTrak Part Series Letter Fuse Required EQ300C and EQ600C Parts Pressure POT EQ300C and EQ600C Parts List Enclosure Part Description Qty Enclosure Parts List Pressure Pot Pressure Pot Parts ListRef. Part Description Qty Hose Schematic EcoQuip Skid Systems Vapor Abrasive Blast Systems and AccessoriesEcoQuip Trailer Systems Model Series Brakes Trailer Units Mobile/Skid UnitsModel Model Description Nozzles HosesModel Description Type Length Blast Control Common Spare Parts Other Accessories Dimensions EQ300S Technical SpecificationsEQ600S Graco Information Graco Extended Warranty for EcoQuip Components