Replacing the DataTrak Fuse, Replace Fuse | Graco EQ300C specs

Replacing the DataTrak Fuse

FIRE AND EXPLOSION HAZARD

To reduce the risk of fire and explosion, the fuse must be replaced in a non-hazardous location.

Use only an approved replacement fuse (see table). Use of an unapproved fuse will void Graco’s warranty.

Replace Fuse

1.Remove the screw, metal strap, and plastic holder.

2.Pull the fuse away from the board

3.Replace with an approved fuse.

Repair

Approved Fuses

DataTrak Part	*Series Letter	Fuse Required
Number
289822	A or B	24C580
	C and later	24V216
All other part	A	24C580
numbers
numbers	B and later	24V216

334667B

33

Image 33

Graco EQ300C manual Replacing the DataTrak Fuse, Replace Fuse, Approved Fuses DataTrak Part Series Letter Fuse Required

Contents

EcoQuip Vapor Abrasive Blast System Important Safety Instructions Related Manuals Models Dust and Debris Hazard Burn Hazard OEM System Guidelines MetricCompressor Size and Hose Length Minimum ID Metric EQ300C and EQ600C System Component Identification DataTrak Controls KeyDataTrak see DataTrak Controls, Pressure Relief Procedure Operation Checklist Before Starting Connecting the Blast Hose and Air Hose Setting Up the Equipment 10 gal 200-500 lb Ti24824a 0 0 0 8 8 0 0 0 3 Blasting on Higher Surfaces Blasting Tips Grit Size Blast Pressure Abrasive Dose Blast Angle General Metering Valve SettingsWood Steel Using the Wash Feature Refilling the Pot with Abrasive Shutting Down Operation Winterizing the Equipment Problem Cause Solution TroubleshootingSee Cleaning the Auto-Vent Valve, See Repairing the Main Air Regulator See Repairing the Diaphragm Valve See Setting Up the Equipment,Procedure see Shutting Down, Intact. See Hose Schematic, Metering Valve Settings, Properly. See Hose Schematic,See Pressure Relief Procedure, Setting Up the Equipment, If flushing does not solve the problem, see Checking for Leaks Troubleshooting Examples Pneumatic Blast Control Circuit Repairing the Main Air Regulator Perform Pressure Relief Procedure,Repair Flushing the Diaphragm Valve Perform the Pressure Relief Procedure, Repairing the Diaphragm Valve Cleaning the Auto-Vent Valve Replacing the DataTrak Battery Replace BatteryApproved Batteries Replacing the DataTrak Fuse Replace FuseApproved Fuses DataTrak Part Series Letter Fuse Required EQ300C and EQ600C Parts Pressure POT EQ300C and EQ600C Parts List Enclosure Part Description Qty Enclosure Parts List Pressure Pot Parts List Pressure PotRef. Part Description Qty Hose Schematic EcoQuip Skid Systems Vapor Abrasive Blast Systems and AccessoriesEcoQuip Trailer Systems Model Series Brakes Trailer Units Mobile/Skid UnitsModel Model Description Hoses NozzlesModel Description Type Length Blast Control Common Spare Parts Other Accessories Dimensions Technical Specifications EQ300SEQ600S Graco Information Graco Extended Warranty for EcoQuip Components