Digital Tracking System (ProContractor and IronMan models only)
Digital Tracking System
(ProContractor and IronMan models only)
Operation Main Menu
Short press to move to next display. Press and hold (5 seconds) to change units or reset data.
ti22719a
1.Turn pressure to lowest setting. Trigger gun to relieve pressure. Turn prime valve down to DRAIN position.
ti22941a
2.Turn power ON. Pressure display appears. Dashes will not appear unless pressure is less than 200 psi (14 bar, 1,4 MPa).
ti22942a
Change Display Units
Press and hold DTS button for 5 seconds to change pressure units (psi, bar, MPa) to desired units. Selec- tion of bar or MPa changes gallons to liters x 10. To change display units DTS must be in pressure display mode and pressure must be at zero.
ti22876a
Job Gallons
1.Short press DTS button to move to Job Gallons (or liters x 10).
ti22717a
NOTE: JOB scrolls past, then the number of gallons sprayed above 400 psi (28 bar, 2.8 MPa) for Mark VII and Mark X displays; 1000 psi (70 bar, 7 MPa) for all other models.
2. Press and hold to reset to zero.
Lifetime Gallons
1.Short press DTS button to move to Lifetime Gallons (or liters x 10).
NOTE: LIFE scrolls briefly, then the number of gal- lons sprayed above 400 psi (28 bar, 2.8 MPa) for Mark VII and Mark X displays; 1000 psi (70 bar, 7 MPa) for all other models.
ti22718a
20 | 332916C |
