Warnings

Warnings

The following warnings are for the setup, use, grounding, maintenance, and repair of this equipment. The exclama- tion point symbol alerts you to a general warning and the hazard symbols refer to procedure-specific risks. When these symbols appear in the body of this manual or on warning labels, refer back to these Warnings. Product-specific hazard symbols and warnings not covered in this section may appear throughout the body of this manual where applicable.

WARNING

GROUNDING

This product must be grounded. In the event of an electrical short circuit, grounding reduces the risk of electric shock by providing an escape wire for the electric current. This product is equipped with a cord having a grounding wire with an appropriate grounding plug. The plug must be plugged into an outlet that is properly installed and grounded in accordance with all local codes and ordinances.

Improper installation of the grounding plug is able to result in a risk of electric shock.

When repair or replacement of the cord or plug is required, do not connect the grounding wire to either flat blade terminal.

The wire with insulation having an outer surface that is green with or without yellow stripes is the grounding wire.

Check with a qualified electrician or serviceman when the grounding instructions are not completely understood, or when in doubt as to whether the product is properly grounded.

Do not modify the plug provided; if it does not fit the outlet, have the proper outlet installed by a qual- ified electrician.

This product is for use on a nominal 120V or 230V circuit and has a grounding plug similar to the plugs illustrated in the figure below.

120V US

230V

Only connect the product to an outlet having the same configuration as the plug.

Do not use an adapter with this product.

Extension Cords:

Use only a 3-wire extension cord that has a grounding plug and a grounding receptacle that accepts the plug on the product.

Make sure your extension cord is not damaged. If an extension cord is necessary, use 12 AWG (2.5 mm2) minimum to carry the current that the product draws.

An undersized cord results in a drop in line voltage and loss of power and overheating.

332916C

5

Page 5
Image 5
Graco 695, Mark VII, Mark IV, Mark X, 795, 1095, 1595 important safety instructions 120V US, Grounding

1095, 695, 1595, Mark IV, Mark VII specifications

The Graco Mark series is a renowned line of airless paint sprayers designed for professional contractors and serious DIY enthusiasts. Each model in this series brings its own unique features and technologies, catering to a range of applications and user preferences.

The Graco Mark VII is known for its high efficiency and durability. It features a powerful motor that allows for consistent pressure and delivery of a variety of coatings. This model is equipped with a proven piston pump technology, providing a smooth and reliable spray pattern. Its compact design makes it easy to transport, while enhanced filtration systems ensure a clean finish by minimizing clogs and maintaining a steady flow of paint.

Moving on to the Graco Mark IV, this model offers versatility for both small and medium-sized projects. The Mark IV’s lightweight design, combined with an adjustable pressure control, allows users to fine-tune their spray for different materials, from heavy latex paints to stains. The inclusion of 2-finger trigger control and ergonomic handle enhances user comfort during extended use. Additionally, the Mark IV comes with a range of tip sizes, accommodating various application needs.

The Graco Mark V takes performance a notch higher. It is equipped with advanced technology for increased efficiency and reduced overspray. The innovative SmartControl system enables operators to set the pressure for a perfect finish, whether they are working on detailed trim work or expansive wall surfaces. Furthermore, the Mark V’s robust build and high-capacity intake system make it ideal for larger projects, ensuring consistent output throughout.

The Graco 1595 model is designed for heavy-duty applications and is particularly favored for its reliable performance in tough conditions. It boasts a heavy-duty pump that can handle high viscosity materials without compromising the finish. Along with an adjustable flow rate, the durable construction ensures longevity, making it a worthwhile investment for contractors who frequently tackle extensive jobs.

Lastly, the Graco Mark X is another high-performance sprayer that stands out for its advanced technology integration. With features such as automatic pressure adjustment and a digital display, users can achieve a precise spray application with ease. The Mark X also emphasizes user safety with built-in safeguards, including automatic shut-off systems. Its larger capacity makes it suitable for commercial-grade projects, ensuring effective coverage and efficiency.

In summary, the Graco Mark series, including the Mark VII, Mark IV, Mark V, 1595, and Mark X, offers a range of options with varied features and capabilities. Whether for small DIY tasks or large-scale commercial jobs, there is a model to meet every need, ensuring professional-quality results and user satisfaction.