Graco Mark IV, Mark VII, Mark X, 795, 695, 1095, 1595 Troubleshooting, Plug power cord in

Troubleshooting

	STEP 1:
200-240V	Plug power cord in
	and turn switch ON.
V	Connect probes to
	on/off switch. Turn

-meter to AC Volts.

-

200-240V

STEP 2:

Plug power cord in and turn switch ON. Connect probes to on/off switch. Turn meter to AC Volts.

100k ohm

STEP 3:

Check motor thermal switch. Unplug yellow wires. Meter should read according to Resistance Table on page 30. NOTE: Motor should be cool during reading.

STEP 4:

Plug power cord in and turn switch ON. Disconnect potentiometer.

34 332916C