Graco Mark VII, Mark IV, Mark X, 795 Fast Flush, ProContractor and IronMan models only, To Activate

Fast Flush

(ProContractor and IronMan models only)

To flush the hose and gun at an accelerated speed, per- form the following steps:

1. Perform steps 1 - 3 of Cleanup, page 22.

2. Squeeze gun trigger and turn prime valve down to DRAIN position and then over to FAST FLUSH.

ti22940a

3. Continue flushing system until fluid appears clear.

Fast Flush (ProContractor and IronMan models only)

WatchDog™ Protection System

(ProContractor and IronMan models only)

Pump stops automatically when material pail is empty.

To Activate:

1. Perform Startup.

ti22938a

2.Turn WatchDog switch ON and WD ON displays. EMPTY displays/flashes and pump stops when Watchdog protection system detects an empty material pail.

ti22033a

3.Turn WatchDog switch OFF. Add material or rep- rime sprayer. Turn pump switch OFF and ON to reset WatchDog protection system. Turn WatchDog switch back ON to continue to monitor material level.

ti22939a

332916C 17