Basic American Medical products, a division of GF Health products, Inc. • Matrix II • rev d Manual p9
ssembly - standard head and foot boards
A
1. Assemble two Mounting Tubes (#4) to the Headboard (#1) and two to the Footboard (#2) using eight 1/4-20 x 4mm
JCB-B Hex Drive Bolts (#6), going through the pre-drilled holes on the boards and into the eight 1/4-20x .60” Long
Threaded Inserts (#3) (already attached to the boards) as shown. Hand tighten only at this time.
2. Insert the Mounting Tubes into t he Main Bed Frame Tubes so that the holes match up as shown. Secure with four
5/16 x 1-1/2” Clevis Pins (#7) and 1-9/16 Hair Pin Clips (#8) (1 each per bed frame tube). The mounting tubes will
slide underneath the two 5/16-18 x 1.50” Carriage bolts that we re pre-inserted into the Main Frame Rails at the
head-end of the bed by the manufacturer.
3. Now tighten all screws with a phillips screwdriver. Be careful not to overtighten.
* There are a number o f stylish options for Matrix II Headboards and Footbo ards includ ing Oak, Walnut , and
Mahogany finishes. Please consult your catalog, our website (www.graham-field.com), or contact one of our Sales
Representatives for options. Please note that headboards and footboardscome as a kit and are not interchangeable.
Item # Quantity Part # Description
11 - Headboard*
2 1 - Footboard*
3 8 100-7025-004 1/4-20 UNC x .60” Long Threaded Insert
(pre-inserted into footboard and headboard)
Headboard & Footboard Mounting Kit (999-0775-000) includes the following parts:
4 4 999-0746-035G Mounting Tubes
5 4 100-4700-015 1” x 1” Square Tube End Cap (pre-inserted in tubes)
6 8 100-5425-094 1/4-20 x 4mm JCB-B Hex Drive Bolt
7 4 100-7931-007 Clevis Pin - 5/16 x 1-1/2” w/cross hole
8 4 100-2001-006 1-9/16 Hair Pin Clip
not shown 1 100-9900-060 M4 4mm Hex Allen Wrench
Hardware Pre-inserted into Main Frame Rails to Hold Mounting Tubes
9 2 100-5231-003 5/16-18 x 1.50” Carriage Bolt
10 2 100-6731-006 5/16-18 Thin Nylon Lock Nut