A ccessory Assembly - Foot-END ASSIST BAR

NOTE: Pre-assembly of the Rail Bracket to the foot section is required

optIon 1

before the Foot-End Assist Bar can be attached. Please see page 19.

 

1.With the Assist Bar (#1) bracket facing inward toward the bed as shown, align the two holes on the bracket with the first and third holes (from the head-end of the bed) of the pre-welded head deck bracket (#2)

2.For the quick release option, insert the Clevis Pin end of the two Lanyard assemblies (3a) from the outside into the assist bar bracket holes. Insert the hair pins on the opposite end of the lanyard assemblies (3b) into the holes of the clevis pins.

3.For a fixed attachment option, insert two cap screws (#4) from the outside into the assist bar bracket holes. Secure the screws by attaching two Thin Nylon Lock Nuts (#5).Tighten with two 13/16 wrenches.

Order Kit #ZA80350 - Includes Bracket and Hardware

Item #

Qty.

Part #

Description

 

 

 

 

1

1

999-0803-902G

Assist Bar - Foot End

 

 

 

 

2

1

999-0786-995

Attach Foot Rail Bracket

(included)

(see page 19)

 

 

 

 

 

 

not

2

100-4710-003

1.00” Dia. End Cap

shown

 

 

 

Option 1: Quick Release (in Hdw Bag 999-0803-905)

 

 

 

 

3

2

999-0784-100

Quick Release

Lanyard Assembly

 

 

 

 

 

 

 

Option 2: Fixed Attachment (in Hdw Bag 999-0803-905)

 

 

 

 

4

2

100-5463-004

5/8-11 x 4.50”

Hex Head Cap Screw

 

 

 

 

 

 

 

5

2

100-6763-001

5/8-11 Thin Nylon

Lock Nut

 

 

 

 

 

 

 

to safely remove Hair pin clip grasp on circular end and pull.

 

 

 

 

close-up of Hair

 

 

 

pin clip (#8)

 

 

 

inserted into

 

 

 

hole in clevis

1

optIon 2

pin (#7)

 

 

 

 

 

 

4

5

2

WARNING: The mattress support platform should always be placed in the flat position when not attended.

! When assessing the Risk for Entrapment, you need to consider your bed, mattress, head- and footboards, half rails, assist bars, and other accessories as an entire system. All bed systems are evaluated for compliance to the FDA/CDRH “Hospital Bed System Dimensional and Assessment Guidance to Reduce Entrapment” guidelines.

A resident/patient’s condition could lead to resident/patient entrapment. It is extremely important to review the resident/patient’s physical and mental condition, and initiate an appropriate individual care plan to address any entrapment risks.

Basic American Medical products, a division of GF Health products, Inc. • Matrix II • rev d Manual

p20

Page 23
Image 23
Graham Field MM7014, Mp7114, MM7114, Mp7174, MM7174, Mp707404, Mp701404 manual Ccessory Assembly Foot-END Assist BAR, OptIon 1