SETTINGS/BASIC SETTINGS PAGE
End User Password
Confirm Password
Internet Protocol
IPv4 Address Type
DHCP Host name (Option 12)
DHCP Vendor Class ID (Option 60)
Allow DHCP Option 120 to override SIP Server
PPPoE Account ID
PPPoE Password
PPPoE Service Name
IPv4 Address
Subnet Mask
Gateway
DNS Server 1
DNS Server 2
Preferred DNS Server
IPv6 Address Type
Static IPv6 Address
IPv6 Prefix Length
IPv6 Prefix
DNS Server 1
Allows the administrator to set the password for
Confirms the end user password field to be the same as above.
Selects Prefer IPv4 or Prefer IPv6.
Allows users to configure the appropriate network settings on the phone to obtain IPv4 address. Users could select "DHCP", "Static IP" or "PPPoE". By default, it is set to "DHCP".
Specifies the name of the client. This field is optional but may be required by some Internet Service Providers.
Used by clients and servers to exchange vendor class ID.
Enables DHCP Option 120 from local server to override the SIP Server on the phone. The default setting is "No".
Enter the PPPoE account ID.
Enter the PPPoE Password.
Enter the PPPoE Service Name.
Enter the IP address when static IP is used.
Enter the Subnet Mask when static IP is used.
Enter the Default Gateway when static IP is used.
Enter the DNS Server 1 when static IP is used.
Enter the DNS Server 2 when static IP is used.
Enter the Preferred DNS Server.
Allows users to configure the appropriate network settings on the phone to obtain IPv6 address. Users could select
Enter the static IPv6 address when Full Static is used in "Statically configured" IPv6 address type.
Enter the IPv6 prefix length when Full Static is used in "Statically configured" IPv6 address type.
Enter the IPv6 Prefix (64 bits) when Prefix Static is used in "Statically configured" IPv6 address type.
Enter the DNS Server 1 for IPv6.
FIRMWARE VERSION 1.0.4.23 | GXP1100/GXP1105 USER MANUAL | Page 33 of 46 |
