Enable
ACS URL
Periodic Inform Enable
Periodic Inform Interval
Connection Request Username
Connection Request Password
Connection Request Port
CPE SSL Certificate
CPE SSL Private Key
Offhook Auto Dial
Auto Recover From Abnormal
Syslog Server
Syslog Level
Send SIP Log
NTP Server
Enables
URL for
ACS username for
ACS password for
Enables periodic inform. If set to "Yes", device will send inform packets to the ACS. The default setting is "No".
Sets up the periodic inform interval to send the inform packets to the ACS.
The user name for the ACS to connect to the phone.
The password for the ACS to connect to the phone.
The port for the ACS to connect to the phone.
The Certificate File for the phone to connect to the ACS via SSL.
The Private Key for the phone to connect to the ACS via SSL.
Configures a User ID/extension to dial automatically when the phone is off hook. The phone will use the first account to dial out. The default setting is "No".
Configures whether auto recover or not when the phone is running abnormal. The default setting is "Yes".
The URL/IP address for the syslog server.
Selects the level of logging for syslog. The default setting is None. There are 4 levels: DEBUG, INFO, WARNING AND ERROR.
Syslog messages are sent based on the following events:
•product model/version on boot up (INFO level);
•NAT related info (INFO level);
•sent or received SIP message (DEBUG level);
•SIP message summary (INFO level);
•inbound and outbound calls (INFO level);
•registration status change (INFO level);
•negotiated codec (INFO level);
•ethernet link up (INFO level);
•SLIC chip exception (WARNING and ERROR levels);
•memory exception (ERROR level).
Configures whether the SIP log will be included in the Syslog messages or not. The default setting is "No".
Defines the URL or IP address of the NTP server. The phone may obtain the date and time from the server.
FIRMWARE VERSION 1.0.4.23 | GXP1100/GXP1105 USER MANUAL | Page 37 of 46 |
