45û Bevel

!

#1

#4

 

 

Front

 

 

 

A

 

 

 

 

 

 

 

 

 

 

 

 

#2

#3

Figure 56. 45¡ blade parallelism measurement.

3.Tighten down one trunnion bolt a small amount and then move on to each of the oth- ers, tightening each down the same amount.

4.Continue to rotate through the bolts, tighten- ing them a little each time until they are all secure.

5.Flip the saw rightside up and repeat steps 2- 6 on page 41.

6.Once the miter slot is adjusted parallel to the blade, recheck all measurements and be sure the table mounting bolts are secure.

7.Re-attach the blade guard and the fence.

8.Verify that the blade guard is correctly aligned with the blade.

45û Bevel

!

NOTICE

#1

#4

 

 

 

 

 

 

Front

B

#2#3

Figure 57. 45¡ blade parallelism measurement.

If the trunnion assembly is loosened in the future, make note of the shim locations and re-assemble accordingly.

G0444/G0444Z 10" Table Saw

-43-

Page 45
Image 45
Grizzly G0444Z instruction manual ¡ blade parallelism measurement