Proper
Alignment
Figure 35. Correct blade guard alignment.
8.Repeat steps 6-7.
9.Adjust the saw blade through its complete tilt and height adjustments. The saw blade should not make contact with any part of the blade guard. If it does,
Table Insert
Components and Hardware Needed: | Qty |
Standard Blade Table Insert | 1 |
Dado Blade Table Insert | 1 |
Tools Needed: |
|
3mm Allen Wrench | 1 |
To install the table insert: |
|
1.Place the table insert into the table.
2.Place a straightedge across the table and the table insert.
3.Using a 3mm Allen wrench, adjust the table insert flush with the table by rotating the setscrews as shown in Figure 36.
Figure 36. Adjusting the table insert.
|
|
|
|
|
|
|
|
|
|
|
|
G0444/G0444Z 10" Table Saw | |||
