Grizzly G0705 owner manual Break-In, To break in the spindle

6.Press the STOP button to stop the machine. Allow the spindle to stop rotating before pro- ceeding.

7.Repeat Step 5 with the REVERSE button. The spindle should rotate in the opposite direction.

8.Press the EMERGENCY STOP button to stop the machine. Allow the spindle to stop rotating before proceeding.

9.WITHOUT resetting the switch, press the FORWARD button. The machine should not start.

—If the machine does not start, the EMERGENCY STOP button safety feature is working correctly. The Test Run is com- plete.

—If the machine does start (with the stop button pushed in), immediately disconnect power to the machine. The OFF button safety feature is not working correctly. This safety feature must work properly before proceeding with regular operations. Call Tech Support for help.

-24-

Break-In

NOTICE

Failure to follow spindle break-in proce- dures will likely cause rapid deterioration of the spindle and other related parts and may void the warranty.

NOTICE

DO NOT leave the area while break-in pro- cedure is under way. You must be ready to stop the machine if any problem occurs.

It is essential to closely follow the proper break-in procedures to ensure trouble free performance. Complete this process once you have familiarized yourself with all instructions in this manual.

To break in the spindle:

1.Make sure the machine has been properly lubricated. Refer to Lubrication on Page 39.

2.Make sure the spindle area is free of obstruc- tions.

3.Set the spindle speed to the lowest RPM. Refer to Speed Changes on Page 29.

4. Turn the spindle ON and let it run for a mini- mum of 10 minutes. Repeat this step for each RPM setting. Refer to Speed Changes on Page 29.

Model G0705 (Mfg. since 09/09)