![](/images/new-backgrounds/1259052/25905219x1.webp)
Safety Instructions for Machinery
DISCONNECTING POWER SUPPLY. Always disconnect machine from power supply before servicing, adjusting, or changing cutting tools (bits, blades, cutters, etc.). Make sure switch is in OFF position before reconnecting to avoid an unexpected or unintentional start.
INTENDED USE. Only use the machine for its intended purpose and only use recommended accessories. Never stand on machine, modify it for an alternative use, or outfit it with non- approved accessories.
STABLE MACHINE. Unexpected movement during operations greatly increases the risk of injury and loss of control. Verify machines are stable/secure and mobile bases (if used) are locked before starting.
FORCING MACHINERY. Do not force machine. It will do the job safer and better at the rate for which it was designed.
GUARDS & COVERS. Guards and covers can protect you from accidental contact with mov- ing parts or flying debris. Make sure they are properly installed, undamaged, and working correctly before using machine.
REMOVING TOOLS. Never leave adjustment tools, chuck keys, wrenches, etc. in or on
AWKWARD POSITIONS. Keep proper foot- ing and balance at all times when operating machine. Do not overreach! Avoid awkward hand positions that make workpiece control dif- ficult or increase the risk of accidental injury.
DANGEROUS ENVIRONMENTS. Do not use machinery in wet locations, cluttered areas, around flammables, or in
APPROVED OPERATION. Untrained operators can be seriously hurt by machinery. Only allow trained or properly supervised people to use machine. When machine is not being used, dis- connect power, remove switch keys, or
CHILDREN & BYSTANDERS. Keep children and bystanders a safe distance away from work area. Stop using machine if children or bystand- ers become a distraction.
FEED DIRECTION. Unless otherwise noted, feed work against the rotation of blades or cutters. Feeding in the same direction of rotation may pull your hand into the cut.
SECURING WORKPIECE. When required, use clamps or vises to secure workpiece. A secured workpiece protects hands and frees both of them to operate the machine.
UNATTENDED OPERATION. Never leave machine running while unattended. Turn machine Off and ensure all moving parts completely stop before walking away.
MAINTENANCE & INSPECTION. A machine that is not properly maintained may operate unpre- dictably. Follow all maintenance instructions and lubrication schedules to keep machine in good working condition. Regularly inspect machine for loose bolts, alignment of critical parts, binding, or any other conditions that may affect safe opera- tion. Always repair or replace damaged or mis- adjusted parts before operating machine.
EXPERIENCING DIFFICULTIES. If at any time you are experiencing difficulties performing the intended operation, stop using the machine! Contact our Technical Support Department at (570)
Model G0705 (Mfg. since 09/09) |