Grizzly G0705 G2861-Face Mill G4051-Carbide Insert for Face Mill, G9765-9-PC. Ball End Mill Set

G2861—Face Mill

G4051—Carbide Insert for Face Mill

This 21/2" Face Mill accepts four carbide inserts (not included). Comes with an R-8 arbor.

Figure 49. G2861 Face Mill.

G9760—20-PC. 2 & 4 Flute TiN End Mill Set. Includes these sizes and styles in two and four flute styles: 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 3/8", 11/16", and 3/4".

Figure 50. G9760 20-PC End Mill Set.

G9765—9-PC. Ball End Mill Set

Features 2 flute ball nose end mills. Includes the following sizes: 1/8", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 5/8" and 3/4".

Figure 51. G9765 9 PC. Ball End Mill Set.

Model G0705 (Mfg. since 09/09)

G5641—1-2-3 Blocks

G9815—Parallel Set

H5556—Edge Finder Set

G5641

H5556

G9815

Figure 52. G5641 1-2-3 Blocks, G9815 Parallel

Set, and H5556 Edge Finder Set.

H8370—Power Feed for Mills

If you want to get the most out of your mill, you really need a power feed. This power feed comes with everything required to start milling with exact control. Comes supplied with a mounting bracket, gear, auto-stop limit switch with moveable stop pins, gear guard, and motor. Specs: 0–140 RPM, 200 RPM rapid switch, 440 in/lb. maximum torque, 110V 60Hz motor, 4:1 bevel drive gear.

Figure 53. H8370 Power Feed.

-37-