Test Run

Once the assembly is complete, test run your machine to make sure it runs properly and is ready for regular operation. The test run consists of verifying the following: 1) The motor powers up and runs correctly and 2) the stop button safety feature works correctly.

If, during the test run, you cannot easily locate the source of an unusual noise or vibration, stop using the machine immediately, then review Troubleshooting on Page 41.

If you cannot find a remedy, contact our Tech Support at (570) 546-9663 for assistance.

Before starting the machine, make sure you have performed the preceding assembly and adjustment instructions, and you have read through the rest of the manual and are familiar with the various functions and safety features on this machine. Failure to follow this warning could result in serious personal injury or even death!

To test run the machine:

1.Make sure you understand the safety instruc- tions at the beginning of the manual and that the machine is set up properly.

2.Make sure all tools and objects used during setup are cleared away from the machine.

3.Connect the machine to the power source.

Model G0705 (Mfg. since 09/09)

4.Push the EMERGENCY STOP button in, then twist it clockwise (see Figure 22) so it pops out. When the EMERGENCY STOP button pops out, the switch is reset and ready for operation.

Figure 22. Resetting the switch.

5.Verify that the machine is operating correctly by pushing the FORWARD button.

—When operating correctly, the machine runs smoothly with little or no vibration or rubbing noises.

—Investigate and correct strange or unusual noises or vibrations before operating the machine further. Always turn the machine off, then disconnect the machine from power when investigating or correcting potential problems.

-23-

Page 25
Image 25
Grizzly G0705 owner manual Test Run