Grizzly G0705 owner manual Spindle Height, To operate the micro-adjustment handwheel

Spindle Height

The Model G0705 has coarse downfeed levers and a micro-adjustment handwheel. To operate the downfeed levers, simply pull forward and down on the lever nearest you. The spindle will go down until you stop pulling or until it hits the depth stop.

To operate the micro-adjustment handwheel:

1.Tighten the locking knob located on the cen- ter of the hub for the downfeed levers (Figure 34). This transfers control from the downfeed levers to the micro-adjustment handwheel.

Micro-Adjustment

Handwheel

Handwheel Dial

Locking Knob

Figure 34. Micro-adjustment handwheel.

2.Loosen the thumb screw on the rim surface of the handwheel dial. Turn the dial until the "0" lines up with the index line. Tighten the thumb screw.

3Turn the handwheel according to the distance you want to move the quill downward. Each complete revolution equals 0.108".

To lock the quill, Tighten the quill locking lever to lock the spindle for milling operations (Figure 35).

Quill locking

Lever

Figure 35. Quill locking.

Model G0705 (Mfg. since 09/09) -31-