Samsung TD390S, T24D390SW Resetting the Picture Mode Settings, Adjusting the Screen Position

Advanced Features

Adjusting the Screen Position

Picture → Picture Size → Zoom/Position Adjusts the screen position.

This option is only available with Picture Size set to Wide Zoom, Zoom, or Screen Fit. When the TV is tuned to a digital channel, the screen position cannot be adjusted if the Picture Size is set to Screen Fit.

1.To adjust the screen's position, select Picture → Picture Size → Zoom/Position. A pop-up window appears.

2.Select Zoom or Position again from the pop-up window.

3.Adjust the screen. Once done, select Zoom or Position and then Close. Select Reset to reset the screen position.

Adjusting the 4:3 Screen Size

Picture → Picture Size → 4:3 Screen Size

Available only when picture size is set to Auto Wide. You can determine the desired picture size at the 4:3 WSS (Wide Screen Service) size or the original size. Each European country requires different picture size.

✎✎Not available in Component or HDMI mode.

Listening to Audio Only with the Screen Turned Off (Picture Off)

Picture → Picture Off

Turns off the screen and plays audio through the speakers only. To turn the screen back on, press any button other than the TV and VOLUME buttons.

Resetting the Picture Mode Settings

Picture → Reset Picture

Use this option to reset the current Picture Mode to its factory settings. This does not affect the settings of other Picture Modes.

English - 106