Samsung T27D390SW, T24D390SW, TD390S Connecting to a Wired Internet Network Automatically

Basic Features

Connecting to a Wired Internet Network Automatically

Network → Network Settings

Automatically connect to an available network.

1.Set the Network Type to Wired, and then select Connect.

2. The TV attempts to connect to an available network. Once successful, you will see a confirmation message. Select OK. If the attempt fails, try again, or connect manually.

Connecting to a Wired Internet Network Manually

Network → Network Settings

With networks that require a static IP address, you will need to enter the IP address, subnet mask, gateway, and DNS values manually to connect to the network. To get these values, contact your Internet Service Provider (ISP).

✎✎Refer to the "Dynamic versus Static IP Addresses" section for more information on dynamic IP and static IP addresses.

1.Set the Network Type to Wired, and then select Connect.

Network Settings

Select your network type.

Network Type Wired

Connect

You can connect your TV to the internet.

English - 38