Grizzly G0758 owner manual Inventory Figure Qty

Inventory

The following is a list of items shipped with your machine. Before beginning setup, lay these items out and inventory them.

If any non-proprietary parts are missing (e.g. a nut or a washer), we will gladly replace them; or for the sake of expediency, replacements can be obtained at your local hardware store.

NOTICE

Inventory (Figure 6)		Qty
A.	Handwheel Handles w/Screws	3
B.	Bottle for Oil	1
C.	Toolbox	1
D.	Drill Chuck Arbor R-8 x B-16	1
E.	Standard Screwdriver	1
F.	Phillips Screwdriver	1
G.	Spindle Pin	1
H.	Open-End Wrench 8/10mm	1
I.	Open-End Wrench 12/14mm	1
J.	Open-End Wrench 17/19mm	1
K.	Drill Chuck 3–16mm w/Chuck Key	1
L.	T-Bolt M8-1.25 x 55 Assemblies	2
M.	Hex Wrenches 2.5, 3, 4, 5, 6mm	1 Each

If you cannot find an item on this list, care- fully check around/inside the machine and packaging materials. Often, these items get lost in packaging materials while unpack- ing or they are pre-installed at the factory.

A

G

B

D

E

K

C

F

L

M

H

I

J

Model G0758 (Mfd. Since 2/14)

Figure 6. Inventory included with machine.

-13-