Grizzly G0758 owner manual Replacing DRO Battery, Quill Outside Surface, Quill Rack

Quill Outside Surface

Lube Type.. Model SB1365 or ISO 68 Equivalent

Lube Amount	Thin Coat
Lubrication Frequency	8 hrs. of Operation

To lubricate quill:

1.Without disturbing grease on quill rack, clean outside smooth surface of quill (see Figure 41) with mineral spirits and shop rags.

Quill Outside

Surface

Figure 41. Outside surface of quill.

2.When dry, apply thin coat of lubricant to smooth surface, then move spindle up and down to evenly distribute oil.

Quill Rack

Lube Type..Model T23964 or NLGI#2 Equivalent

Lube Amount	Thin Coat
Lubrication Frequency	90 hrs. of Operation

To lubricate quill rack:

1.Move quill down to gain full access to quill rack (see Figure 42).

Rack

Figure 42. Quill rack location.

Model G0758 (Mfd. Since 2/14)

2.Clean teeth with mineral spirits, shop rags, and brush.

3.When dry, apply thin coat of grease to teeth and raise/lower quill several times to evenly distribute.

Note: Re-apply oil that may have been removed during the cleaning process to the quill surface around the rack.

Replacing DRO

Battery

If the DRO stops operating correctly, the 3V lithi- um cell battery must be replaced.

To replace DRO battery:

1.Using a #3 standard screwdriver, remove battery cover (see Figure 43) by rotating counterclockwise.

Battery Cover

Figure 43. Battery cover for DRO.

2.Remove old battery, dispose of it according to state and federal regulations, then replace it with a new one.

3.Replace battery cover.

-31-