Grizzly G0758 owner manual Lifting & Placing, To lift machine and place it in position

Lifting & Placing

The Model G0758 mill/drill can be mounted to a workbench or the Model T26612 optional stand (see Figure 9). The optional stand is specifically designed for Model G0758 and comes with pre- drilled mounting holes.

Figure 9. Model T26612 optional stand for

Model G0758.

HEAVY LIFT!

Straining or crushing injury may occur from improperly lifting machine or some of its parts. To reduce this risk, get help from other people and use a forklift (or other lifting equipment) rated for weight of this machine.

-16-

To lift machine and place it in position:

1.Place shipping crate next to workbench (or stand) where machine will be placed.

2.Use vertical handwheel to raise headstock as far as possible (see Figure 10). Lock head- stock in place to avoid sudden shifts during lifting.

Lifting

Sling

Vertical

Handwheel

Figure 10. Headstock positioned for lifting.

3.Hang sling from forklift fork and place it under headstock, as shown in Figure 10. DO NOT place sling over any controls or against any components that may be damaged from the force required for lifting.

4.Unbolt machine from pallet. Have an assis- tant on the ground steady machine to prevent it from swinging and lift it slightly off the pallet with forklift.

5.Carefully place machine onto workbench or optional stand.

6.Mount machine to workbench following instructions in Bench Mounting on Page 17 or to stand following instructions included with stand.

Model G0758 (Mfd. Since 2/14)